Colour

Certification

Coating type

Cut protection level

Environment of use

Function

Lining

Palm material 

Type of work

Size

Automatskapas utefter position 13+ i ett artikelnummer

NEW!

Smooth and flexible montage glove in exclusive leather. Elastic upper side in cotton for optimal fit and comfort.

Work Gloves Leather 12-pack

Fully lined premium Deerskin glove with multifunction. Impact protector, prebend fingers, 3-way closure and 2 layer reinforced palm.
Comfort zone: -5°C to -25°C. Size 8-11.

Work Gloves Lined Leather

Gloves in extra tough deerskin with spacious fingertips for maximum comfort. Neoprene padding across knuckles and water resistant, breathable lining that lets moisture escape.
PPE category 2, EN 388:2003 2132, EN 420:200.

Work Gloves Lined Leather,

Fully lined glove in synthetic leather and rubber reinforced palm.
Comfort zone: -5°C to -20°C. Size 8-12.

Work Gloves Lined

Half lined gloves in synthetic leather with PU-stretch.
Comfort zone: 5°C to -10°C. Size 7-12.

Work Gloves Lined WP

Winter-lined work glove in strong, high-quality goatskin leather, with a membrane that makes it waterproof and provides breathability.
A glove for cold days when you need precision. Pre-bent design for enhanced comfort and fit.

Glove in synthetic leather with rubberreinforced palm and 3-finger open design. Size 8-11

Work Gloves

Fully lined glove in goatskin and high vis with reinforced palm.
Comfort zone: 5°C to -10°C. Size 8-11.

Glove in synthetic leather with reinforced palm and velcro closure. Size 8-12

Work gloves ideal for work that chafes your gloves extra hard, such as reinforcing and plastering. Also suitable for earthworks and civil engineering works in dry conditions.
The hand and fingers have extra reinforcement and anti-slip function for a better grip. The back of the glove is in water repellent TPU Spandex.

Work gloves in machine washable synthetic leather. No seams in fingertips for extra comfort. Made of elastic Spandex that lets the hand breathe, with adjustable Velcro straps.

Glove in synthetic leather with PU-stretch and open cuff. Size 7-12

Thin work gloves ideal for precise handling and light assembly work. Synthetic glove, palm dipped in polyurethane. The material on the palm also provides certain resistance to oil and grease and the back of the glove is ventilated. 

PU-dipped work gloves 12-pack

Waterproof, winter-lined cut-protection glove, level C, with latex coating all around the glove. This glove has a very good grip and is ideal in cold and wet environments where there is a risk of cuts.
Certified for level 2 contact heat.

Cut Protection Glove C Lined WP

Lined cut-protection glove, level C, with nitrile coating on the palm and airy upper surface. The glove has excellent breathability and is perfect as an all-round glove in cold environments where there is a risk of cuts.
Certified for level 2 contact heat.

Cut Protection Glove C Lined Nitrile dipped

Thin and flexible cut-protection glove with the highest possible cut-protection level, touch function and thumb reinforcement. The glove has a nitrile coating in the palm and airy outer surface, which provides an all-round glove perfect for environments where there is a high risk of cuts.
Certified for level 1 contact heat.

Cut Protection Glove F Touch Nitrile dipped

Welding gloves made of grain goatskin with seams stitched with aramid thread, which withstands high temperatures. The extra long cuff keeps welding spatter and sparks off the arms. Tight fit for increased dexterity. 

Welding gloves

Seamless knit gloves in synthetic material. Nitrile coating on palm. These gloves give you great comfort, dexterity and good grip.
Cut protection - Level D on model 2282 and Level B on model 2280.

Cut protection gloves

Glove completely dipped in latex, making it waterproof on both palm and upper hand. The 2962 is knitted in two layers and ensures an extremely good grip in both wet and dry environments.

Work gloves lined WP, latex coated

Winter glove in hi-vis with touch function. The glove has a safety collar that makes it easy to put on or take off.
Suitable in cold environments where there may be a need for extra visibility and handling touchscreens.

Work glove Lined Touch

Robust gloves for winter months in high-quality heavy-duty leather. Upper section in cotton and high collar for better protection against sparks. Flexible lightweight lining with thin polyester fleece for a good grip.
The gloves are delivered in unbroken 6-packs. The price of the product refers to cost per pair.

Thin and flexible cut-protection glove, level D, with touch function. Nitrile coating in the palm and airy outer surface, which provides an all-round glove suitable for environments where there is a risk of cuts. Features thumb reinforcement and is non-metal and non-fiberglass.
Certified for level 1 contact heat.

Cut Protection Glove D Touch Nitrile dipped

Super thin, supple, waterproof, nitrile-dipped cut protection glove, cut protection level B. Extremely good precision, provides excellent protection against weather and cuts for working outdoors.
The sandy grip ensures good grip in dry, wet and oily conditions.

Cut Protection Glove B WP, nitrile coated

This durable latex glove that is perfect for precision work outdoors has a liquid-tight dip in the inner hand and a top that is breathable. 2961 is made in two layers with an outer liner in polyester and an inner liner in terry-knitted acrylic.
The glove is flexible, keeps the heat very good and delivers an extremely good grip in both wet and dry environments.

Work gloves lined, latex coated

A thin, nitrile-dipped cut protection glove that has cut protection level C. With this glove, you get good precision and a natural defence against cut injuries, and for extra protection at one of the most exposed points, it has a thumb crotch reinforcement.
Has a soft, stretchy and comfortable grip surface with a sandy structure.

Cut protection glove C Nitrile-coated

Waterproof and lightly lined winter glove with touch function. This model has a velcro-adjusted collar that makes the glove fit well on the hand.
An all-round glove suitable for work in wet and cold environments where there is a need to handle touchscreens.

Work glove Lined Touch WP

Ultra-thin cut protection glove with cut protection level B that allows you to combine the most delicate precision tasks with the necessary protection.
Blåkläder's thinnest nitrile glove in both liner and dipping (dipped in foamed nitrile with a smooth surface) feels like extra skin and fits extremely well on the hand.
The metal fibre-free glove ensures that the hand breathes well by transporting out moisture, and it also has a thumb crotch reinforcement for extra protection.

Cut protection glove B Nitrile-coated

Perfect gloves when performing really heavy work in hot environments. Made of split leather with a thin cotton fleece lining to provide insulation against heat.
Seams stitched with aramid thread for extra resistance to high temperatures. The extra long cuff keeps welding spatter and sparks off the arms.

Heat protection gloves

Thin but still durable cut protection glove with an extremely good fit. Cut protection level B. It is dipped in foamed nitrile and has a smooth microfoam surface.
This is the cut protection glove for you who are looking for the perfect balance between precision, durability and flexibility.
You can perform all tasks, even those with the highest demands on precision, without removing the glove and maintaining the cut protection. Has thumb crotch reinforcement.

A chrome-free, unlined basic work glove, with a good fit and excellent grip. Supple, thin and water-resistant in the grip. The back of palm breathes well, and the reinforced fingertips offer extra protection against dirt and wear.

The latex glove 2960 is perfect for rough work, has a long life and is latex dipped, which means it has both waterproof and breathable surfaces, evenly distributed over the glove.
The glove is seamless, which makes it more fitted and provides an extremely good grip in wet and dry environments thanks to the texture of the latex sandy finish.
The durable 2960 has a rough knitting, which allows it bind to a lot of air and thus gives warmth in a good way. The winter-lined glove is best suited in autumn, winter and spring because latex does not solidify in cold environments.

Pliant mechanic gloves in leather for cold days. Upper section in cotton. Flexible lightweight lining with thin polyester fleece for a good grip.
The gloves are delivered in unbroken 6-packs. The price of the product refers to cost per pair.

Smooth and slightly thinner glove knitted in acrylic, which gives a good insulation ability. The glove is dipped in latex, which means that it has both waterproof and breathable surfaces, evenly distributed all over the glove.
The top of the thumb, however, is not dipped, but instead provides a smoother and more sensitive feeling when using these autumn and spring gloves.

Work gloves light lined, latex coated

Nitrile-dipped cut protection glove with cut protection level B. A robust, durable and metal-fibre-free glove that is suitable for heavy-duty work tasks.
Has a soft, stretchy and comfortable coating with a sandy grip surface and a thumb crotch reinforcement for extra protection and durability.

Ultra-thin cut protection glove with cut protection level B for the most precision-demanding tasks. The glove, which has a thin PU coating and is metal-fibre-free, creates the necessary precision combined with light cut protection.

Cut protection glove B PU-coated

Robust, hard-wearing work gloves made of full-grain cowhide, suitable for any type of heavy-duty work.
The back of the glove is made of cotton and the reinforced, extended cuff protects against dirt and wear.

Leather work gloves

Lightly lined and flexible winter glove with touch function. The short collar makes the glove easy to put on and take off.
Suitable as an all-round glove in cold environments where there is a need to handle touchscreens.

An unlined and very flexible all-round leather glove that is best suited for assembly work.
A classic goatskin glove that is comfortable to the hand and thanks to the stretchy backhand of cotton, it offers a comfortable fit. Has reinforced fingertips for longer durability.

Work gloves leather

An unlined work glove completely dipped in latex, making it waterproof in both the palm and on the top of the hand. A very durable glove that can boast an extremely good grip in wet and humid environments.
Has a tight fit for increased precision and can easily handle both precision jobs and rougher tasks.

Latex-coated Work gloves WP

Leather gloves made of grain goatskin suitable for various types of precision work. The back of the glove is made of cotton jersey for a soft, comfortable fit.
The gloves provide excellent breathability. Additional reinforcement around the fingertips, thumb and index finger.

Top-quality assembly gloves. Made of thin, fine grain goatskin to offer excellent touch sensitivity, a good grip and good comfort. Synthetic polyester back.
A high-quality option for users who prefer the more traditional feel of leather.

A waterproof, fully dipped work glove with a sanded palm for a better grip in dry, wet and oily environments. The glove is knitted in 18 gauge, making it thin and supple with a tight fit for good fingertip sensitivity in precision work.
Nitrile is suitable for oily environments and offers good protection against dirt and grease.

Work Gloves WP, nitrile coated

PU-dipped all-round gloves with cut protection level C. An affordable, metal-fibre-free glove with good grip and, above all, protection against severe cuts.

Cut protection glove C PU-coated

Thin and flexible all-round glove that is antistatic and ESD-approved, making it suitable in environments where the risk of static electricity must be eliminated.
The glove with touch function has a nitrile coating that provides good grip and durability. Certified for level 1 contact heat.

Glove Touch ESD Nitrile Coated

Thin and flexible glove with touch function. The back of the hand is made of breathable polyester, and a velcro-adjusted collar makes the glove fit well on the hand.
This all-round glove is suitable for work where there is a need to handle touch screens.

Work glove Touch

A classic, PU-coated cut protection glove that has cut protection level B. Liner free from metal and fibreglass that makes the glove soft and flexible. An affordable allround glove with good comfort, suitable for larger industries.

A strong and durable yet supple, stretchy and flexible work glove dipped in latex. The unlined back of palm breathes well.
Sandy grip area that’s best for rough, heavy work, offering excellent texture in dry and especially wet environments.

Work Gloves, latex coated

An extremely functional and nitrile-dipped glove that is best suited for work in assembly or construction. The very useful, flexible, and medium coarse all-round glove has a very good grip consisting of nitrile dots, which gives an improved grip in oily environments.
2935 is a reliable and high-performance helper of the finer kind.

Nitrile-dipped Work gloves with dot grip

Thin and flexible glove with touch function. The back of the hand is made of breathable polyester, and the glove has a short collar that makes it easy to put on and take off.
Suitable as an all-round glove in environments where there is a need to handle touchscreens.

Thin and airy work gloves ideal for work in indoor environments. The gloves have elasticated panels over the knuckles and fingers to ensure a really good fit. 

WORK GLOVES FOR ALL JOB OCCASIONS

22763910

Work Gloves Leather 12-pack

22383922

Work Gloves Lined Leather

22393923

Work Gloves Lined Leather,

22493945

Work Gloves Lined

22663944

Work Gloves Lined WP

28111474

Work Gloves Lined WP

22333913

Work Gloves

22403930

Work Gloves Lined

22433940

Work Gloves

22443941

Work Gloves